Affirmative 7370 Mode D'Emploi
Connection icon if the connection is lost or if the YEStablet 7370 is not properly seated on the
cradle. The button needs to be engaged again to re-establish a lost or improper connection.
cradle. The button needs to be engaged again to re-establish a lost or improper connection.
Connection
Established Connection
Not
Established
Wireless Network Card Antenna System
The YEStablet 7370 has a PC Card slot along the upper left edge of the device. This slot houses the
wireless LAN adapter. This slot may be left open for the user to insert a Cisco Aironet 350 adapter, or
the YEStablet 7370 may be delivered with an embedded Z-Com card with a custom antenna in a snap-
type housing. In the latter case, the user has the choice of leaving the antenna in the snap-on position
(A) or of pulling the antenna tip off the retainer snap in order to obtain better wireless connectivity
through varying orientations up to near vertical (B).
(A)
(B)
Dynamic Display Rotation
The YEStablet 7370 allows dynamic rotation of the display in 90-degree increments. Double-click on
the Desktop icon and then select the desired rotation from the Screen Rotation window. The rotation
change will be effected immediately, without needing to re-start the 7370. Invoking a rotation change
may not fully apply to applications that are already open.
Software Installation and
Synchronization (ActiveSync)
Synchronization (ActiveSync)
The YEStablet 7370 is amenable to software installation and synchronization through connection to a
host PC. Connection can be made with a USB cable between the host PC and the USB Slave port on
the cradle of the YEStablet 7370. Connect as follows:
1. Install Microsoft’s ActiveSync 3.6 or above on the host PC. You can download this program from
39