Brother MFC-P2000 Guide D’Installation Rapide

- 17 -

The 

 lamp indicates the drum unit is nearly at the end of its life.

Lamp Machine status

Off ❍ The drum unit can be used.

On ● The drum unit is nearly at the end of its life. Installing a new drum unit

of the On-line manual.

The 

 lamp blinks to indicate a machine error status such as “Cover Open” and

“Memory Full.” If any other error occurs, the machine indicates the error by blinking
the 

 lamp with another lamp or by printing an error report.

✒

The 

, 

 and 

 lamps are used to indicate machine errors with the

 lamp. See “ALARM INDICATIONS AT A GLANCE” in this manual and take

corrective action for the error.

This switch will be used for the following purposes depending on the situation.

Cancel printing
If you press the 

 during printing, the machine immediately stops printing and

ejects the paper.
Wake-up
If the machine is in sleep mode, pressing the 

 wakes it up into the  ready state.

Form Feed
If the Data lamp is on, press the 

. The machine prints any data remaining in the

machine memory: this operation is called “Form Feed.”
Error Recovery
If an error occurs, the machine will recover from some errors automatically. If the error
does not clear automatically,  press the 

 to clear the error and continue machine

operation.