Argox pt-10 Manuel D’Utilisation
37
7.4 Collector Problems
Collector does not respond to key press while the display stays on
Message “No Programs…” is shown when you try to start a program
There is no user’s application program for PT-10 / PT-12 loaded
in the collector. Contact your supplier.
in the collector. Contact your supplier.
For example pressing the Alpha key
does not toggle the Alpha
indicator
There is a flaw in the application program. Retrieve the battery
pack and place it in again. Activate the system menu and restart
the application program, or download new application.
pack and place it in again. Activate the system menu and restart
the application program, or download new application.
If problem appears continuously, contact the user’s application
program supplier.
program supplier.
CCD scanner stays off, when pressing the Scan key
Power is off
The Scan key is not the power key. Press the PW key
to get
power first.
If the collector is not used for a while, the collector will
automatically switch off. Press any key to reactivate the collector.
automatically switch off. Press any key to reactivate the collector.
Collector gets no power, when pressing the power key
The main battery is exhausted
Replace the batter pack, or charge the collector in the cradle.
Collector is still not workable and needs a service
Send the collector to your local supplier for service, paying attention to the limited
warranty.