OKI B6500 Manuel D’Utilisation

B6500 Series Setup Guide

English - 6

Open the cover.

Take the drum-toner cartridge out of the 
packaging box and shake it seven or 
eight times as shown in the diagram.

Place the drum-toner cartridge on a flat 
surface and pull out the seal horizontally.      

     

Hold the drum-toner cartridge by the 
grip and insert it into the slot inside the 
printer.

Close the cover securely.  

Connect the interface cable to be used to the 
printer.

Connect the interface cable to the 
interface connector at the back of the 
printer: serial (1), USB (2), network (3), 
parallel (4).  

For a parallel cable, lift up the wire clip 
on both sides to secure it after it has 
been inserted into the connector.

When the optional offset catch tray is installed, 
fold the tray first before opening the cover.

Do not touch any parts inside the printer.

When pulling out the seal, pull it out 
horizontally. The tape might break if it is 
pulled out diagonally.
After the seal has been pulled out, do not 
shake or bump the drum-toner cartridge.

Do not touch any parts inside the printer.
Ensure that the drum-toner cartridge is 
firmly located.

If the offset catch tray is folded as in Step 1, 
close the cover and then return the tray to its 
original position.

Connect a USB cable only after the printer 
driver has been installed on the computer.