OKI B6500 Mode D'Emploi
B6500 User’s Guide> 33
Printing PDF File
When sending the PDF file to the printer for printing using lpr
command, printing will be done with the defaults set at the control
panel. These defaults include:
command, printing will be done with the defaults set at the control
panel. These defaults include:
NOTE
>
When lpr command is used for printing, specify the
number of copies by lpr command. The [Quantity] setting
on the control panel will become disabled. Also, if the
number of copies is not specified by lpr command, it will
be treated as one copy.
number of copies by lpr command. The [Quantity] setting
on the control panel will become disabled. Also, if the
number of copies is not specified by lpr command, it will
be treated as one copy.
Target OS
Windows NT 4.0/Windows 2000/Windows XP
Printing PDF File
The following specification on the computer is an example of using
lpr command to print PDF file.
lpr command to print PDF file.
NOTE
>
indicates space.
Example: Printing a [event.pdf] file with a printer IP address of
192.168.1.100.
192.168.1.100.
Printing via Electronic Mail - E-mail Printing
When the optional hard disk or compact flash has been installed and
the printer is connected to a network, enabling it to receive e-mails
via TCP/IP communication, e-mails can be sent from the computer
to this printer.
the printer is connected to a network, enabling it to receive e-mails
via TCP/IP communication, e-mails can be sent from the computer
to this printer.
Printing of e-mail contents and TIFF or PDF attachments can be done
from this printer.
from this printer.
This feature is known as E-mail Printing.
• Copies
• Paper size
• Duplex
• Paper feed
• Print mode
C:\>lpr
-S
192.168.1.100
-P
lp
event.pdf <Enter> key