Ariston mca15 Mode D'Emploi

! Keep this booklet for consultation at any time. In the 
event of sale, transfer of the machine or of the owner 
ensure that the booklet is kept with the machine so that 
the new owner is informed of the operating instructions 
and warnings.

! Read all instructions carefully. They contain important 
information regarding installation, operation and safety.

! Packaging is not a toy for children and should 
be disposed of in accordance with regulations for 
separated waste collection (see Precautions and 
recommendations).

! Installation must be carried out in compliance with 
these instructions by professionally qualified personnel. 
Incorrect installation may cause damage to persons, 
animals and/or objects.

To ensure the correct functioning of the appliance, the 
cabinet must have the right characteristics:

•  the panels next to the coffee machine must be in 

heat-resistant material;

•  veneered wood cabinets should be joined using 

glues resistant to 100°C/212°F and must be steam-
resistant;

•  for all installations of built-in coffee machines 

cabinets should have the following dimensions:

! Once the appliance has been encased, there must 
be no contact possible with electrical parts. Declared 
consumption values shown on the rating plate are 
measured on the basis of this type of installation.

To ensure good ventilation, remove the rear panel of the 
cabinet. 
It is recommended to install the coffee machine so that 
it is resting on a continuous surface with an opening of 
at least 1¾” x 21¼” (45 x 540 mm) in the base.

To centre the coffee machine, position the shims 
beneath the holes in the outer structure of the machine.

! All shims must be attached so that they ensure perfect 
stability of the machine.

To attach the shims to the cabinet proceed as follows:

•  remove the drip tray 
from the machine;

•  fasten the 2 wood 
screws in the 2 holes 
located to the rear of the 
base.

•  remove the lower 
plastic protection;