Ariston mca15 Mode D'Emploi

• Nominal voltage  

See plate on the appliance

• Power rating  

See plate on the appliance

• Power supply  

See plate on the appliance

• Shell material

Metal

• Dimensions (w x h x d) 

595 x 460 x 320(mm)

Faceplate - 23.43” x 18.11” x 0.79”

Body - 21.26” x 18.11” x 11.89”

• Weight 

23 kg / 51 lbs

• Cable length

1200 mm / 47¼”

• Control panel 

Piezoelectric

• Water tank  

Removable

• Water tank

1.75 liters / 59.17 fluid onces

• Coffee bean hopper capacity

300 g / 10 onces coffee beans

• Pump pressure

15 bars / 1500 KPa

• Boiler 

2 - Stainless Steel - Aluminium

• Safety devices  

Boiler pressure safety valve

Safety thermostat

Subject to engineering and manufacturing changes 
due to technological developments.

The machine conforms to the European Directive 
89/336/EEC (Italian Legislative Decree 476 dated 
04/12/92) concerning electromagnetic compatibility.

! All protective parts must be attached so that they 
cannot be removed without the aid of a tool.

Next replace the protection and the drip tray.

! Coffee machines with three-pole power cable are 
regulated for alternating current, with voltage and 
frequency shown on the rating plate attached to the 
appliance.

! The installer is responsible for checking the correct 
connection of components and observing safety 
regulations.

Before connecting make sure that:
•  the socket is earthed and is compliant with statutory 

regulations:

•  the socket is able to withstand the maximum power 

load of the machine, shown on the rating plate;

•  the supply voltage is within the values shown on the 

rating plate;

•  the socket is compatible with the appliance’s plug. 

Otherwise replace the plug or the socket; do not use 
extension leads or adaptors.

! Once the appliance is installed, the electric cable and 
socket must be easy to reach.

! The power cable must not be subject to coiling or 
compression.

! The cable must be checked regularly and replaced 
only by authorised technicians.

•  Put the plug in the 
tray socket on the rear 
of the machine

•  Connect the power 
cable to the mains

•  Put the plug in the 
power socket.

The position of the 
power cable must be 

such that no section of it is above room temperature 
by more than 50°C/122°F.