Garmin 5008 Manuel Du Propriétaire

a

ppendIX

The first time you turn your unit on, you must configure a series of initial settings. These settings 

must also be configured when restoring factory settings (

). All of these settings can be 

configured later from the Configure screen.
The settings are as follows:

language—Touch the language that you want shown on your screen.
Welcome—Touch 

.

Any NMEA devices?—Touch 

 if NMEA devices are or will be connected.

AIs Connection (shown if answer to Any NMEA devices was yes)—Touch the type of AIS 

 for more information.

Position Format—Specify the coordinate system that you want location readings to appear 

in.
Time Format—Specify whether you want the time displayed in a 12-hour, 24-hour, or UTC 

(Universal Time Code) format.
Time Zone—Specify the time zone for your location.
units—Specify units for onscreen measurements as statute, Metric, or Nautical.
Minimum safe Depth—Specify the minimum safe depth for your boat. Refer to your boat 

specifications for more information.
Minimum Overhead Clearance— Specify the minimum overhead clearance for your boat. 

Refer to your boat specifications for more information.
Zone Alarm (shown if an AIS Connection is indicated)—Touch Yes if you want to set zone 

Zone Distance (shown if answer to Zone Alarm is Yes)—Touch the distance within which 

you would like a zone alarm to sound.
Zone Time (shown if answer to Zone Alarm is Yes)— Touch the distance within which you 

would like a zone alarm to sound.