Aethra avc500 Mode D'Emploi

Broadcast
This menu contains the following configuration settings:

• This option allows you to set a transmission as “broadcast” (without capabilities exchange).

Note:

In order to make a Broadcast call, the two terminals must have the same Audio, Video, Rate and Data (LSD)

configurations.

Display Status Bar and Transparency

• STATUS BAR:

Allows you to personalise the System graphical interface, choosing whether you want the status bar to be present
and, if so, what information should be displayed on it.

Information on the status bar:
Date and Time, selected camera, channel status, charges, data channel.

• TRASPARENCY:

allows you to add transparency to graphical pages where the video window is not reduced in size.
This transparency can be set to four different preset levels (high=75% transparency, medium=50%, low=25%,
opaque=0%). Transparency can be used in different ways:

a. Automatic: (default) Only the diagnostic pages of the “Connection state” uses transparency with a

selectable initial level (default medium). The transparency level can be changed dynamically.

b. Variable: All pages where no video is present use a selectable initial transparency level (default medium).

The transparency level can be changed dynamically.

c. Fixed: All pages where no video is present use a selectable initial transparency level (default medium). The

transparency level cannot be changed dynamically.

d. Off: Transparency is always deactivated.

Dynamic change of transparency level is achieved by pressing the remote control key C. The transparency is always
deactivated when a page is superimposed with a message page to improve legibility.

Customize colors

• Allows personalization of the graphical interface colours of the System.