Sony DSC-H7 Manuel D’Utilisation

• If the shutter speed is set at 1/3 second or slower, the NR slow shutter function activates automatically to 

reduce the picture noise and 

 appears.

• If the proper exposure is not obtained after making the settings, the setting value indicators on the screen 

flash when the shutter button is pressed halfway down. You can shoot in this condition, but we 
recommend that you adjust the flashing values again.

• The flash is set to   (Flash forced on) or 

 (Flash forced off).

• When the shutter speed is fast, the amount of flash light may be insufficient even if you fire the flash.

You can manually adjust the amount of light that passes through the lens.

1

Select A with the mode dial.

2

Select an aperture value with the wheel dial (page 35).

– When the zoom is set fully to the W side, you can select an aperture from F2.7 to F8.0.
– When the zoom is set fully to the T side, you can select an aperture from F4.5 to F8.0.

3

Shoot the image.

• The shutter speed is automatically adjusted from 1/2000 to 8 seconds.
• If the proper exposure is not obtained after making the settings, the setting value indicators on the screen 

flash when the shutter button is pressed halfway down. You can shoot in this condition, but we 
recommend that you adjust the flashing values again.

• The flash is set to   (Flash forced on), 

 (Slow synchro) or 

 (Flash forced off).

You can manually adjust the shutter speed and the aperture values.

1

Select M with the mode dial.

2

Select a shutter speed with the wheel dial (page 35).

3

Select an aperture value with the wheel dial (page 35).
The difference between the settings and proper exposure judged by the camera appears as an EV 
value (page 36) on the screen. 0EV indicates the value judged as the most suitable by the camera.

4

Shoot the image.

• The camera maintains the setting even when the power is turned off. Once you set a value you like, you 

can reproduce the same exposure by simply setting the mode dial to M.

• If the proper exposure is not obtained after making the settings, the setting value indicators on the screen 

flash when the shutter button is pressed halfway down. You can shoot in this condition, but we 
recommend that you adjust the flashing values again.

• The flash is set to   (Flash forced on) or 

 (Flash forced off).