Bizfon 2000 Mode D'Emploi

Page de 106
Bizfon Manual II: Administrator's Guide  
Administrator’s Menus 
Bizfon2000 and Bizfon4000 (SW Version 4.1.x) 
 
12
 
Network Status 
The  Network Status page includes the following information 
about Interfaces
Interface Name lists the Network interfaces available on the 
Bizfon (LAN, WAN, IPSec and a number of PPPs, depending 
on the number of active PPP connections). 
IP Address lists the IP addresses corresponding to each 
network interface. 
Subnet Mask lists the subnet masks corresponding to each 
network interface. 
Properties will list either the MAC address corresponding to 
each network interface on the Bizfon or the PPTP, L2TP and 
IPSec peer IP address if an active VPN (IPSec or PPP) 
interface exists. 
Monitor includes links to survey LAN, WAN, IPSec and PPP 
traffic correspondingly. The VPN traffic link will be displayed 
only if a VPN has been configured. The selection of these links 
will open a new window with a table of network traffic statistics 
on the following selected interfaces:  
• 
Received Bytes  
• 
Received Packets  
• 
Received Errors  
• 
Received Drop Errors  
• 
Received Overrun Errors  
• 
Received MultiCast 
Packets 
• 
Transmitted Bytes  
• 
Transmitted Packets  
• 
Transmitted Errors  
• 
Transmitted Drop Errors  
• 
Transmitted Carrier Errors 
• 
Transmitted Collisions 
 
Fig. II-13: Bizfon Status Network Status page  
When opening the corresponding interface statistics window, no traffic values are displayed at first. After opening the window, the tables will serve as 
a counter and traffic statistics will be updated every minute. 
DNS ServerAlternative DNS Server and Default Gateway - these display the Bizfon settings corresponding to what has been configured with the 
 
Services (NTP Server and Client, DHCP Server and Client, DNS, Firewall, NAT, PPP, IDS) statuses: shows if they have stopped or if they are still 
running
The View VPN Status link refers to the 
 page where all VPN (IPSec, PPTP and L2TP) connections can be viewed and edited. 
Transfer Statistics - link to the Transfer Statistics page. 
The Transfer Statistics page shows a user-defined statistics 
table with the transmit/receive value (criteria), interface type 
and time period. It contains the following components:  
Time range of statistic table - the  drop down list includes 
the period (in days) statistics data that is to be collected and 
the corresponding diagram charts that are to be built. 
Interface - the drop-down list offer the values: 
• 
WAN - Wide Area Network (WAN) events only 
• 
LAN - Local Area Network (LAN) events only 
 
When Show also as readable values checkbox is selected, 
an additional table with statistics values will be displayed on 
the next page.  
 
Fig. II-14: Transfer Statistics page