Canon MF5880dn Guide D’Installation Rapide

7

Connect the power cord into the rear socket 

on the back side of the machine and the wall 

outlet, and press the [I] side of the main power 

switch (A) to turn ON.

Do not remove the USB cap that covers the USB port on 
back side of the machine and do not connect the USB 
cable at this time. 
Do not use a USB cable at this time. You will need a USB 
cable during the software installation procedure for 
USB connection.
If you want to use the optional paper cassette, attach 
the Paper Feeder Unit PF-44 to the machine before 
turning ON the machine. (For instructions on how to 
attach the Paper Feeder Unit PF-44, see “Attach the 
Optional Cassette to the Main Unit ,” on p. 6.)

–

–

–

When <DISPLAY LANGUAGE> appears, press 

 or 

 to select the language, and press 

[

OK

].

E N G L I S H

D I S P L A Y   L A N G U A G E

If you want to change the display language at a later time, 
press   [Menu] 

→ <2. COMMON SETTINGS> → 

<6. DISPLAY LANGUAGE>, then select the language.

When <COUNTRY/REGION> appears, press 

 or 

 to select the country, and press 

[

OK

].

U N I T E D   S T A T E S

C O U N T R Y / R E G I O N

Make sure that the country/region is selected correctly. 
If not, faxes may not be sent/received properly.
It is possible to change the country/region at a later 
time. To change the country/region, press   [Menu] 

→ 

<10. SYSTEM SETTINGS> 

→ <6. COMMUNICATIONS> → 

<1. COUNTRY/REGION>, and then select the country/
region.

–

–

The machine enters the standby mode.

            T E X T / P H O T O

1 0 0 %                 L T R

0 1

Turn OFF the main power switch on the right 

side of the machine, wait for at least 10 

seconds, and then turn ON the power to 

restart the machine.

The machine may enter the standby mode (Auto Clear function) while you 
are setting it up. Make the setting again from the main menu.

The machine may enter the Sleep mode while you are performing setup. 
Press   [Energy Saver] to turn the display back ON and continue the setup.

Check the installation of the toner cartridge and the placement of the paper. 
(See “Unpack the Machine,” on p. 3.)

Make sure that the front cover and scanning platform are closed properly. 
(See “Unpack the Machine,” on p. 3.)

●

●

●

●