Canon MF5880dn Mode D'Emploi

Fax

Sending Fax Documents

This section describes the flow of sending faxes.

If <RESTRICT NEW ADD.> is set to <ON>, you cannot specify fax 
numbers using   -  ,   [numeric keys] and   [Tone]. Make 
sure that <RESTRICT NEW ADD.> is set to <OFF>. For details, see 
“Restricting the New Address,” in the e-Manual.

 

Place documents.

 

Press 

 [SEND/FAX]/

 [FAX].

The SEND/FAX indicator lights up and the 

machine enters the send standby mode.

 

Press 

 [SEND/FAX] repeatedly to 

select <FAX>, then press [OK].

S E L E C T : O K

F A X

If the model of your machine is MF5850dn and 

no USB memory is inserted in the USB memory 

port, skip this step.

 

Use   –  ,   [numeric keys] and 

 [Tone] to specify the fax number.

T E L = 0 1 2 X X X X X X X

F A X   N U M B E R

Ex.

If you enter a wrong number when specifying a 

fax number, press 

 to delete the number.

 

Press   [Start].

When you place the documents on the platen 

glass, press 

 or 

 to select the document 

size, then press   [Start] for each document. 

When scanning is complete, press [OK] to 

start sending.
You can also adjust the following scan 

settings as necessary, using the keys on the 

operation panel, after specifying the 

destination in step 4.

 Density: See “Adjusting Density,” on p. 6-29.
 Image Quality: See “Selecting Image Quality,” 
on p. 6-30.
 2-Sided: See “2-Sided Documents,” on p. 6-31.

Scanning starts, and the scanned data is sent to 

the specified fax number.

Use manual sending when you want to talk to the 
recipient before sending a document, or if the 
recipient does not have a fax machine that can 
receive automatically.

You cannot use the platen glass for manual sending.
You cannot use group addresses for manual sending.
You cannot use 2-Sided scanning mode for manual sending.

–

–

•
•

•

–
–
–