Canon MP390 Mode D'Emploi
Chapter 12
Maintenance
111
4
Hold the empty ink tank’s tab and pull
forward to release. Lift out the ink tank.
forward to release. Lift out the ink tank.
CAUTION
• Do not remove the print head from the machine.
• Remove one ink tank at a time.
• Do not touch the round shaft
• Remove one ink tank at a time.
• Do not touch the round shaft
, transparent
film
, film cable
, ink absorber (sponge
part)
, or any metal parts.
IMPORTANT
• Discard the empty ink tank according to local
laws and regulations for disposal of
consumables.
consumables.
• Handle ink tanks carefully to avoid staining
clothing or the surrounding area.
5
Remove the new ink tank from its
packaging. Then hold the ink tank as
shown and remove the protective cap
packaging. Then hold the ink tank as
shown and remove the protective cap
.
CAUTION
• Do not touch the ink port
.
• Do not shake or drop the ink tank as the ink may
leak and stain your clothes or hands.
• Do not attempt to reattach the protective cap
once you remove it.
• Do not place the ink port in contact with any
other surface.
6
Insert the ink tank into the empty slot on
the print head.
the print head.
Press firmly on the ink tank's tab until it locks into
place.
place.
IMPORTANT
• Set a black ink tank in the right slot of the print
head.
• Set a color ink tank in the left slot of the print
head.
7
If you need to replace another ink tank, repeat steps 4 to 6.
8
Close the inner cover.
CAUTION
Press the center of the inner cover until the cover locks into place.
A
B
C
D
A
B