Canon MP390 Mode D'Emploi
Chapter 12
Maintenance
113
Checking The Ink Level
If you reset the ink counter when you installed/replaced the ink tanks, you can check the current
ink level of the ink tanks at any time.
To check the current ink level of the ink tanks, press [COPY], [FAX], [SCAN], or [PHOTO
PRINT].
The LCD will display the ink level for approx. three seconds.
ink level of the ink tanks at any time.
To check the current ink level of the ink tanks, press [COPY], [FAX], [SCAN], or [PHOTO
PRINT].
The LCD will display the ink level for approx. three seconds.
Indicates the remaining ink volume at three different levels.
?
Indicates the ink counter was not reset after replacing the ink tanks.
NOTE
The LCD will not display the ink level when <LOW INK WARNING> is set to <OFF>. (See page 156)
3
Press [Set].
4
Use [
W] or [X] to select <2.INK COUNT RESET>.
5
Press [Set].
The LCD displays a message asking if you replaced the black ink tank.
NOTE
Do not press any keys other than [W] or [X].
6
If you replaced the black ink tank, press [
W]. If you did not, press [X].
The LCD displays a message asking if you replaced the color ink tank.
7
If you replaced the color ink tank, press [
W]. If you did not, press [X].
The ink counter is now reset.
NOTE
Press [Stop/Reset] to switch the machine to exit.
INK VOLUME
1.LOW INK WARNING
INK VOLUME
2.INK COUNT RESET
BLACK INK CHANGED?
- YES
NO +
COLOR INK CHANGED?
- YES
NO +
Ex:
COPY MODE
COL
BLK