Haier HDE5000AW Mode D'Emploi

Custom Program: (11)

•

This allows you to save a favorite cycle,set the desired settings and touch press

“custom program”button for 3 seconds. A beep will sound to indicate the

 cycle has been saved.

To recall your custom cycle ,press the “custom program”button before drying

a load. 

To change the saved cycle,set the desired settings and “custom program”button 

for 3 seconds.

You can also program Anti-Bacterial, Wrinkle Saver and Damp Dry Signal.

Press custom program and press start/pause button to activate.

Status Indicator: (13)

You can lock the controls to prevent any selections from being
made.Or you can lock the controls after you have started a cycle.
Children cannot accidentally start the dryer by touching pads 
with this option selected.
To lock the dryer,press and hold “Damp Dry Signal”for 3 seconds. 
Asingle beep tone is heard and Child Lock is glow.To unlock the

 dryer,press and hold the “Damp Dry Signal”for 3 seconds. 

  

  

  

  

  

  

  

  

  

  

After the power button is pressed,the check filter indicator could 

flashes until Start/Pause is selected.

    

This is a reminder to clean the lint filter before the dry

    

program starts.

When lit this indicates the process the cycle is currently in.

When lit this indicates the process the cycle is currently in.

English

(12)

  

•

Indicates the remaining time (min) during cycle operation.

Note: If the dryer has any problems, it will display an error message.