Nikon D5100 Mode D'Emploi

Page de 260
222
n
Shooting (P, S, A, M)
Shutter-release disabled
:
• Non-CPU lens is attached: rotate camera mode dial to M (
0 65, 199).
• Mode dial rotated to S after shutter speed of “Bulb” or “Time” selected in mode M: choose 
new shutter speed (
0 63).
Full range of shutter speeds not available
: Flash in use (
0 53).
Colors are unnatural
:
• Adjust white balance to match light source (
0 81).
• Adjust Set Picture Control settings (
0 91).
Can not measure white balance
: Subject is too dark or too bright (
0 85).
Image can not be selected as source for preset white balance
: Image was not created with D5100 (
0 87).
Effects of Picture Control differ from image to image
A (auto) is selected for sharpening, contrast, or 
saturation. For consistent results over a series of photos, choose another setting (
0 93).
Metering can not be changed
: Autoexposure lock is in effect (
0 69).
Exposure compensation can not be used
: Choose mode PS, or A (
0 61, 70).
Noise (reddish areas or other artifacts) appears in long time-exposures
: Enable long-exposure noise 
reduction (
0 154).