Devolo adsl modem Mode D'Emploi
|
Router configuration
15
|
devolo MicroLink dLAN ADSL Modem Router
|
EN
3
Router configuration
This chapter will explain how to set up Internet access and how to take
advantage of additional functions and settings of your router with advanced
configuration.
advantage of additional functions and settings of your router with advanced
configuration.
If you intend to use a computer connected via dLAN to configure the router,
you must set up the dLAN network first. For more information, please see
“Configuring the dLAN network with the MicroLink dLAN Configuration Wiz-
ard” on page 41.
you must set up the dLAN network first. For more information, please see
“Configuring the dLAN network with the MicroLink dLAN Configuration Wiz-
ard” on page 41.
The configuration of the MicroLink dLAN ADSL Modem Router can be broken
down into the following steps:
down into the following steps:
Check and configure the DHCP parameters and a number of other settings
of the computers in the network
of the computers in the network
Set up Internet access
Configure additional router functions
We recommend using the setup wizard to configure the DHCP parameters
and set up Internet access. It will assist you with the most important settings
and make suggestions for the required configuration steps (“Setting up Inter-
net access using the setup wizard” on page 15).
and set up Internet access. It will assist you with the most important settings
and make suggestions for the required configuration steps (“Setting up Inter-
net access using the setup wizard” on page 15).
Alternatively, you may also set up Internet access using browser-based con-
figuration (“Setting up Internet access manually” on page 16).
figuration (“Setting up Internet access manually” on page 16).
The additional functions of the router must be set up manually using the
browser-based configuration (“Advanced configuration” on page 17).
browser-based configuration (“Advanced configuration” on page 17).
If you have switched the router's power off and back on, or reset the router
using the 'Factory Default' switch or settings dialogs, you must then also
restart all of the connected computers to update the TCP/IP information.
using the 'Factory Default' switch or settings dialogs, you must then also
restart all of the connected computers to update the TCP/IP information.
3.1
Setting up Internet access using the setup
wizard
wizard
If you are using a computer with a Windows operating system to configure
the router, you have the option of using the setup wizard.
the router, you have the option of using the setup wizard.