Microtek 2020 Manuel Complémentaire

8     ArtixScanDI 2020 Supplement

1. Place the stack of documents to be scanned on the ADF's Document Feed Tray.

Warning:
•

Do not place photo paper or fragile sheets of paper on the feed tray, as doing
this will damage the original photo or fragile sheet during the feeding process.
Always place frail originals on the scanner glass surface and choose “Flatbed”
as your Scan Source.

•

Before scanning the document from the ADF, make sure the flatbed scanning
area is clear of any obstruction.  Otherwise, a scanning error may occur.

2. Launch ScanWizardDI (either as a stand-alone by clicking the program icon, or by

using the “File-Import” or “Scan” command from an application program).

3. Specify your scanning requirements in the ScanWizardDI control panel.

a) Select ADF (Simplex) or Select ADF

(Duplex) in the Scan Source drop-down
menu as your image input device.

– Select ADF (Simplex)  to scan one side of the document.
– Select ADF (Duplex) to scan both sides of the document.

b) Select your image output type in the Scan Type drop-down menu.

Select RGB Color (24 bits) to scan the image in color.

Select Grayscale (8 bits) to scan the image
in grayscale.

Select Black & White (1 bit) to scan the
image in black-and-white.

c) Select a dimension in the Paper Size drop-down menu as your preview image size.

If Auto-crop is selected, the scanner
automatically detects the size of the original
image, crops the full scan frame to fit the
image, and removes unwanted black borders
after the scan.

d) Select your desired image output resolution

in the Resolution drop-down menu.

4. Select the your image type in the Attribute drop-down menu.

-

Select Line Art to scan line art images
(images in one color or in black-and-
white, such as logos or mechanical
blueprints).

-

Select Photo to scan color prints.

-

Select Text to scan text.