Microtek 2020 Manuel Complémentaire

ArtixScanDI 2020 Supplement     9

Previewing can be useful to see if the physical mechanism in your ADF is working properly in
conjunction with the ScanWizardDI scanning software. Previewing requires only the use of a single
sheet of paper (with some text or material on it). Once the paper-scanning mechanism is established
and verified, you can then proceed to use the ADF extensively and with assurance.

To do the preview, follow the steps below:

1.

Load a piece of paper from the paper stack into the ADF’s Document Feed Tray.

2. Click the 

Preview  button to perform a preliminary view of the entire image. When done, a preview

image appears in the preview window.

At this moment, the previewed page is delivered to the document tray from the ADF's Document Feed
Tray.  Load the previewed page, along with the paper stack to be scanned, on the ADF's Document Feed
Tray.  You are now ready to scan.

5. If necessary, adjust image quality by using the image correction tools.

6. Click the Scan or Scan To button to start multiple, automatic scanning.

If ScanWizardDI is launched from an image-editing program, the scanned image is
delivered after the scan to your application, where the image can be saved,
printed, or modified further.

If ScanWizardDI is launched as a stand-alone program, the scanned image can
be saved after the scan to a file, opened in an image-editing program, or sent to
a printer.

Preview window

Preview image (the
enclosed frame
bordered in red)

Toolbar

Scan frame
(enclosed by
dotted lines and
labeled with the
tag “Main”)

Image

correction

settings

Image type

Scanning

settings