Avocent AutoView 2020 Manuel De Montage

Power down the first computer that will be part of

your AutoView Wireless switching system and unplug

its peripherals. Place the transmitter near the

computer and connect the AutoView Wireless

transmitter cables into the computer’s PS/2

keyboard, PS/2 mouse and monitor connections.

Using the supplied audio cable, connect one end

to the transmitter’s audio input connection and the

other end to the computer’s audio output connection.

Connect the local user’s keyboard, monitor and

mouse into the appropriately marked ports on the

rear of the transmitter.

Connect your transmitter to an AC power source with

one of the included power supplies and power up

your computer.

Avocent, the Avocent logo, The Power of Being There and AutoView are registered trademarks of Avocent Corporation or its affiliates. All other marks are the property of their respective owners. © 2004 Avocent Corporation. All rights reserved.   

 590-412-001A

Quick Installation Guide

®

NOTE: Use only an Avocent-supplied power 

supply. The transmitter must be powered up before

the computer.

(Continued on reverse side)

4