Wacom Intuos4 Small Mode D'Emploi

20

20

Set up Intuos4 as shown below for right- or left-handed operation.

Open the Wacom Tablet control panel and select the M

APPING

 

tab.  Choose the E

XPRESS

K

EYS

 R

IGHT

 option – the 

tablet driver automatically configures all aspects of the tablet 
(including the Wacom Tablet control panel options) for correct 
left-handed use.

Next, physically rotate your tablet so the tablet ExpressKeys are 
positioned to the right.  As desired, reconfigure the 

.

Open the Wacom Tablet control panel and select the M

APPING

 

tab.  Choose the E

XPRESS

K

EYS

 L

EFT

 option – the 

tablet driver automatically configures all aspects of the tablet 
(including the Wacom Tablet control panel options) for correct 
right-handed use.

Next, physically rotate your tablet so the tablet ExpressKeys are 
positioned to the left.  As desired, reconfigure the 

.

Note: You are prompted to choose a default tablet orientation during the original tablet installation process using the 
Wacom Tablet CD.  At the log-in and user switching screens, the tablet orientation will use the default setting selected 
when the driver was installed.

You can always change how your tablet is oriented using the above procedure.  But if you want to change the tablet 
default orientation, you must re-install the driver from the Wacom Tablet CD.

Depending on your tablet model, choose the 

 or cable 

routing solution that best applies to your operating configuration.

•

For Intuos4 M or L tablet models, slide the USB port access 
cover to one side or the other.  Then attach the USB cable.

•

For Intuos4 S tablet models, select the right- or left-handed 
USB cable and attach it to the tablet port.  Be careful to 
correctly match the cable connector to the tablet USB port.

•

For Intuos4 XL tablet models, route the USB cable using the 
tablet cable guides.

Next, connect the other end of the USB cable to your computer.

Right-handed use.

Left-handed use.