Panasonic kx-tg2403 Mode D'Emploi
Speed Dialer
Section 3
3
3-A Storing Phone Numbers in Memory
Special Features
5
1
Press PROGRAM
á
.
•The TALK indicator flashes.
2
Enter a phone number up to 22 digits.
3
Press AUTO
Ü
.
4
Press a memory station number (
(0)
to
(9)
).
•A beep sounds.
•To store other numbers, repeat steps 1 through 4.
3-B Dialing a Stored Number
Press
(TALK)
\ AUTO
Ü
\ the memory station number (
(0)
to
(9)
).
•If your line has rotary or pulse service, any access numbers stored after pressing
(TONE)
will not be dialed.
If you misdial
Press PROGRAM
á
to end storing.
\
\ Start again from step 1.
To erase a stored number
Press PROGRAM
á
\ AUTO
Ü
\
\ the memory station number (
(0)
to
(9)
)
for the phone number to be erased.
•A beep sounds.
•A beep sounds.
•If a pause is required for dialing, press
(PAUSE)
where needed. Pressing
(PAUSE)
counts as one digit (5-D).
You can store up to 10 phone numbers in the handset. The dialing buttons ((0) to (9)) function as memory stations.
The TALK indicator light must be off before programming.
The TALK indicator light must be off before programming.
5-D How to use the PAUSE Button
(For Analog PBX Line/Long Distance Service Users)
We recommend you press
(PAUSE)
if a pause is required for dialing with
a PBX or to access a long distance service.
Ex: Line access number
(9)
(PBX)
(9)
\
(PAUSE)
\
•Pressing
(PAUSE)
once creates a 3.5 second pause. This prevents
misdialing when you redial or dial a stored number.
•Pressing
(PAUSE)
more than once increases the length of the pause
between numbers.
5-E Handset Locator
You can locate the handset or page the handset user with beep tones.
1
Press
(HANDSETÒLOCATOR)
on the base unit.
•The IN USE/CHARGE indicator flashes and the handset beeps for 1
minute.
2
To stop paging, press
(HANDSETÒLOCATOR)
again or press
(TALK)
twice on the handset.
Phone number
5-A For Call Waiting Service Users
Press
(FLASH)
if you hear a call-waiting tone while talking.
•The first call is put on hold and you can answer the second call.
•To return to the first caller, press
(FLASH)
again.
•If this function does not operate properly, consult your telephone company
for details.
5-B Automatic Security Code Setting
Whenever you place the handset on the base unit, the unit automatically
selects one of more than a million security codes. These codes help
prevent the unauthorized use of your telephone line by another cordless
telephone user.
selects one of more than a million security codes. These codes help
prevent the unauthorized use of your telephone line by another cordless
telephone user.
5-C Temporary Tone Dialing
(For Rotary or Pulse Service Users)
Press
(TONE)
before entering access numbers which require tone dialing.
•The dialing mode changes to tone. You can enter numbers to access an
answering service, electronic banking service, etc. When you hang up, the
mode will return to pulse.
mode will return to pulse.
•Access numbers entered after pressing
(TONE)
will not be included when
redialing.
(PAUSE)
TALK Indicator
(TALK)
AUTO
Memory Station
Numbers
Numbers
PROGRAM