Panasonic kx-tg2403 Mode D'Emploi

You can store a phone number in the (DIRECT) button. The stored number
is dialed with a one-touch operation. 
The TALK indicator light must be off before programming.

Press 

(TALK)

\

(DIRECT)

.

•If your line has rotary or pulse service, any access numbers stored after

pressing (TONE) will not be dialed.

To erase a stored number: press PROGRAM 

á

\ AUTO 

Ü

\

(DIRECT)

.

•If a pause is required for dialing, press 

(PAUSE)

where needed. Pressing

(PAUSE)

counts as one digit (5-D).

Pressing 

(FLASH)

allows you to use special features of your host PBX such

as transferring an extension call or accessing special telephone services
(optional), such as call waiting.

The flash time depends on your telephone exchange or host PBX. You can
select the following flash times: “90, 100, 110, 250, 300, 400, 600, 700
msec (milliseconds)”, using the handset near the base unit. Your phone
comes from the factory set to “700 msec”.
The TALK indicator light must be off before programming.

Press PROGRAM 

á

\

\ AUTO 

Ü

\

\

(FLASH)

.

(1): 90 msec

(2): 100 msec (3): 110 msec

(4): 250 msec (5): 300 msec (6): 400 msec
(7): 600 msec (8): 700 msec

Dialing button (

(1)

to 

(8)

)

•If 3 beeps sound after programming, a wrong key was pressed. Start

again from the beginning.

•If you are connected via a PBX, a longer flash time may be necessary to

use PBX functions (transferring a call, etc.). Consult your PBX installer for
the correct setting.

1

Press PROGRAM 

á

.

•The TALK indicator flashes.

2

Enter a phone number up to 22
digits.

•If you misdial, press PROGRAM á,

and start again from step 1.

3

Press 

(DIRECT)

.

•A beep sounds.

TALK Indicator

(TALK)

,

(DIRECT)