3com S7906E Manuel De Montage

 

3-3 

Enter system view 

 

— 

Enter ONU port view 

 onu 

 

— 

Bind the current ONU port to an 
ONU 

bind onuid onuid 

 

Required 

 

 

An ONU port can only be bound with one ONU MAC address. Conversely, an ONU MAC address 
can only be bound to one ONU port under one OLT port. 

 

In fiber backup, an ONU can be bound with two ONU ports under two OLT ports acting as backups 
for each other. 

 

In an actual EPON network environment, multiple ONUs may be attached to an OLT. Manually binding 
these ONUs to the OLT one by one will bring about tedious binding work and increase the cost and 
difficulty of network maintenance. To solve this problem, you can configure batch ONU binding or 
automatic ONU binding.  

With batch ONU binding configured, the device automatically binds the current quiet ONU MAC 
addresses to the ONU ports and generate the binding configuration on the ONU ports, however, the 
ONUs joining subsequently will not be bound.  

This binding method is applicable to a initially set up network environment where all ONUs are valid. 

This method can save a great deal of binding operations. You must use the bind onuid command to 

bind the subsequently joining ONUs, thus avoiding automatic registration of invalid ONUs.  

Follow these steps to configure batch ONU binding: 

Enter system view 

— 

Enter FTTH view 

 

— 

Configure batch ONU binding 

onu bind batch 

[ slot slot-id ] 

Required 
By default, batch ONU binding 
is disabled.  

 

With automatic ONU binding configured, the device automatically binds the current quiet ONU MAC 
addresses to the ONU ports and generate the binding configuration on the ONU ports, and the ONUs 
joining subsequently will also be bound automatically.