3com S7906E Manuel De Montage

 

1-8 

Figure 1-7 Add a mapping between domain name and IP address 

 

 

2)  Configure the DNS client 

# Enable dynamic domain name resolution. 

<Sysname> system-view 

[Sysname] dns resolve 

# Specify the DNS server 2.1.1.2. 

[Sysname] dns server 2.1.1.2 

# Configure com as the name suffix. 

[Sysname] dns domain com 

3) Configuration 

verification 

# Use the ping host command on the Switch to verify that the communication between the Switch and 

the host is normal and that the corresponding destination IP address is 3.1.1.1. 

[Sysname] ping host 

 Trying DNS resolve, press CTRL_C to break 

 Trying DNS server (2.1.1.2) 

  PING host.com (3.1.1.1): 

  56  data bytes, press CTRL_C to break 

    Reply from 3.1.1.1: bytes=56 Sequence=1 ttl=126 time=3 ms 

    Reply from 3.1.1.1: bytes=56 Sequence=2 ttl=126 time=1 ms 

    Reply from 3.1.1.1: bytes=56 Sequence=3 ttl=126 time=1 ms 

    Reply from 3.1.1.1: bytes=56 Sequence=4 ttl=126 time=1 ms 

    Reply from 3.1.1.1: bytes=56 Sequence=5 ttl=126 time=1 ms 

 

   --- host.com ping statistics --- 

    5 packet(s) transmitted 

    5 packet(s) received 

    0.00% packet loss 

    round-trip min/avg/max = 1/1/3 ms