3com S7906E Manuel De Montage

 

2-4 

z 

As shown in 

, use a PC as the TFTP server and Device as the TFTP client. Their IP 

addresses are 1.2.1.1/16 and 1.1.1.1/16 respectively. An available route exists between Device 

and PC. 

z 

Device downloads a startup file from PC for upgrading and uploads a configuration file named 

config.cfg to PC for backup. 

Figure 2-2 Smooth upgrading using the TFTP client function 

 

 

1)  Configure PC (TFTP Server), the configuration procedure is omitted. 

z 

On the PC, enable the TFTP server 

z 

Configure a TFTP working directory 

2)  Configure Device (TFTP Client) 

 

If the available memory space of the device is not enough, use the fixdisk command to clear the 

memory or use the delete /unreserved file-url command to delete the files not in use and then perform 

the following operations. 

 

# Download application file newest.app from PC to the device. 

z 

Download application file newest.app from PC to the root directory of the storage medium on the 

AMB. 

<Sysname> tftp 1.2.1.1 get newest.app 

z 

Download application file newest.app from PC to the root directory of the storage medium on the 

SMB (in slot 1). 

<Sysname> tftp 1.2.1.1 get newest.app slot1#flash:/newest.app 

# Upload a configuration file config.cfg to the TFTP server. 

<Sysname> tftp 1.2.1.1 put config.cfg configback.cfg 

# Specify newest.app as the main startup file to be used at the next startup. 

z 

Specify newest.app as the main startup file to be used at the next startup for the AMB. 

<Sysname> boot-loader file newest.app slot 0 main 

  This command will set the boot file of the specified board. Continue? [Y/N]:y 

  The specified file will be used as the main boot file at the next reboot on slot 0! 

z 

Specify newest.app as the main startup file to be used at the next startup for the SMB (in slot 1). 

<Sysname> boot-loader file slot1#flash:/newest.app slot 1 main