3com S7906E Manuel De Montage

 

1-43 

After trap generation is enabled for OSPF, OSPF generates traps to report important events. Traps fall 

into the following levels: 

z 

Level-3, for fault traps  

z 

Level-4, for alarm traps  

z 

Level-5, for normal but important traps 

z 

Level-6, for notification traps 

The generated traps are sent to the Information Center of the device. The output rules of the traps, 

namely, whether to output the traps and the output direction, are determined according to the 

Information Center configuration. (For Information Center configuration, refer to "Information Center 

Configuration" in the System Volume.) 

Follow these steps to configure OSPF network management: 

Enter system view 

— 

Bind OSPF MIB to an 
OSPF process 

ospf mib-binding process-id 

Optional 

The OSPF process with the 
smallest process-id is bound 
with OSPF MIB by default. 

Enable OSPF trap 
generation 

snmp-agent trap enable ospf 
[ process-id ] [ ifauthfail | ifcfgerror | 
ifrxbadpkt | ifstatechange | 
iftxretransmit | 
lsdbapproachoverflow | 
lsdboverflow | maxagelsa | 
nbrstatechange | originatelsa | 
vifcfgerror | virifauthfail | 
virifrxbadpkt | virifstatechange | 
viriftxretransmit | 
virnbrstatechange ] * 

Optional 

Enabled by default 

 

Follow these steps to enable message logging: 

Enter system view 

— 

Enter OSPF view 

ospf [ process-id | router-id router-id | 
vpn-instance instance-name ] * 

— 

Enable message 
logging 

enable log [ config | error | state ] 

Required 

Not enabled by default.