3com S7906E Manuel De Montage

 

1-17 

[DeviceA] interface gigabitethernet 2/0/1 

[DeviceA-GigabitEthernet2/0/1] port link-aggregation group 1 

[DeviceA-GigabitEthernet2/0/1] quit 

[DeviceA] interface gigabitethernet 2/0/2 

[DeviceA-GigabitEthernet2/0/2] port link-aggregation group 1 

[DeviceA-GigabitEthernet2/0/2] quit 

# Create a Layer 2 aggregate interface Bridge-Aggregation 2 and configure the load sharing mode of 

aggregation group 2 as the destination MAC-based load sharing mode.  

[DeviceA] interface bridge-aggregation 2 

[DeviceA-Bridge-Aggregation2] link-aggregation load-sharing mode destination-mac 

[DeviceA-Bridge-Aggregation2] quit 

# Assign ports GigabitEthernet 2/0/3 and GigabitEthernet 2/0/4 to aggregation group 2.  

[DeviceA] interface gigabitethernet 2/0/3 

[DeviceA-GigabitEthernet2/0/3] port link-aggregation group 2 

[DeviceA-GigabitEthernet2/0/3] quit 

[DeviceA] interface gigabitethernet 2/0/4 

[DeviceA-GigabitEthernet2/0/4] port link-aggregation group 2 

2)  Configure Device B 

The configuration on Device B is similar to the configuration on Device A.