3com S7906E Guide De Référence

 

1-37 

ipv4-address: IPv4 address of a peer. 

ipv6-address: IPv6 address of a peer. 

ipv6-prefix-name: IPv6 prefix list name, a string of 1 to 19 characters. 

import: Applies the filtering policy to routes received from the specified peer/peer group. 

export: Applies the filtering policy to routes advertised to the specified peer/peer group. 

Use the peer ipv6-prefix command to specify an IPv6 prefix list to filter routes incoming from or 

outgoing to a peer or peer group. 

Use the undo peer ipv6-prefix command to remove the configuration. 

By default, no IPv6 prefix list is specified for filtering. 

# Reference the IPv6 prefix list list 1 to filter routes outgoing to peer 1:2::3:4. 

<Sysname> system-view 

[Sysname] ip ipv6-prefix list1 permit 2002:: 64 

[Sysname] bgp 100 

[Sysname-bgp] ipv6-family 

[Sysname-bgp-af-ipv6] peer 1:2::3:4 ipv6-prefix list1 export 

peer { group-name | ipv4-address | ipv6-address } keep-all-routes 

undo peer { group-name | ipv4-address | ipv6-address } keep-all-routes 

IPv6 address family view 

2: System level 

group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters. 

ipv4-address: IPv4 address of a peer. 

ipv6-address: IPv6 address of a peer. 

Use the peer keep-all-routes command to save the original routing information from a peer or peer 

group, including even routes that failed to pass the inbound policy.  

Use the undo peer keep-all-routes command to disable this function.  

By default, the function is not enabled.  

# Save routing information from peer 1:2::3:4.