3com S7906E Guide De Référence

 

1-39 

Use the undo pim holdtime assert command to restore the system default.  

By default, the assert timeout time is 180 seconds.  

Related commands: holdtime join-prune, pim holdtime join-prune, holdtime assert.  

# Set the assert timeout time to 100 seconds on VLAN-interface 100. 

<Sysname> system-view 

[Sysname] interface vlan-interface 100 

[Sysname-Vlan-interface100] pim holdtime assert 100 

pim holdtime join-prune interval 

Interface view 

2: System level 

interval: Join/prune timeout time in seconds, with an effective range of 1 to 65,535.  

Use the pim holdtime join-prune command to configure the join/prune timeout time on the interface.  

Use the undo pim holdtime join-prune command to restore the system default.  

By default, the join/prune timeout time is 210 seconds.  

Related commands: holdtime assert, pim holdtime assert, holdtime join-prune.  

# Set the join/prune timeout time to 280 seconds on VLAN-interface 100. 

<Sysname> system-view 

[Sysname] interface vlan-interface 100 

[Sysname-Vlan-interface100] pim holdtime join-prune 280 

pim require-genid 

Interface view