3com S7906E Guide De Référence
1-43
View
Interface view
Default Level
2: System level
Parameters
interval: Join/prune interval in seconds, with an effective range of 1 to 2,147,483,647.
Description
Use the pim timer join-prune command to configure on the current interface the interval at which
join/prune messages are sent.
Use the undo pim timer join-prune command to restore the system default.
By default, the join/prune interval is 60 seconds.
Related commands: timer join-prune.
Examples
# Set the join/prune interval to 80 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim timer join-prune 80
pim triggered-hello-delay
Syntax
pim triggered-hello-delay interval
undo pim trigged-hello-delay
View
Interface view
Default Level
2: System level
Parameters
interval: Maximum delay in seconds between hello messages, with an effective range of 1 to 5.
Description
Use the pim triggered-hello-delay command to configure the maximum delay between hello
messages.
Use the undo pim triggered-hello-delay command to restore the system default.
By default, the maximum delay between hello messages is 5 seconds.
Examples
# Set the maximum delay between hello messages to 3 seconds on VLAN-interface 100.