3com S7906E Guide De Référence

 

1-13 

group-name: MBGP peer group name, a string of 1 to 47 characters. 

Use the display bgp multicast group command to display IPv4 MBGP peer group information. 

# Display the information of the IPv4 MBGP peer group aaa. 

<Sysname> display bgp multicast group aaa 

 BGP peer-group is aaa 

 remote AS 200 

 Type : external 

 Maximum allowed prefix number: 4294967295 

 Threshold: 75% 

 Configured hold timer value: 180 

 Keepalive timer value: 60 

 Minimum time between advertisement runs is 30 seconds 

 Peer Preferred Value: 0 

 No routing policy is configured 

  Members: 

  Peer            V    AS  MsgRcvd  MsgSent  OutQ PrefRcv Up/Down  State 

 

  2.2.2.1         4   200        0        0     0       0 00:00:35 Active 

Table 1-4 display bgp multicast group command output description  

BGP peer-group 

Name of the peer group 

remote AS 

AS number of the peer group 

Type 

Type of the peer group: IBGP or EBGP 

Maximum allowed prefix number 

Maximum allowed prefix number 

Threshold 

Percentage of received prefixes from the peer 
group to maximum prefixes allowed to receive 
from the peer group; If the percentage is reached, 
the system generates alarm messages. 

Configured hold timer value 

Holdtime interval 

Keepalive timer value 

Keepalive interval 

Minimum time between advertisement runs 

Minimum interval for route advertisement 

Peer Preferred Value 

Preferred value specified for the routes from the 
peer 

No routing policy is configured 

No route policy is configured. 

Members 

Detailed information of the members in the peer 
group 

Peer 

IPv4 address of the peer 

V 

BGP version running on the peer