3com S7906E Guide De Référence

 

1-40 

[Sysname-bgp]ipv4-family multicast 

[Sysname-bgp-af-mul] peer 131.108.1.1 enable 

[Sysname-bgp-af-mul] peer 131.108.1.1 keep-all-routes 

peer { group-name | ip-address } next-hop-local 

undo peer { group-name | ip-address } next-hop-local 

IPv4 MBGP address family view 

2: System level 

group-name: Name of an IPv4 MBGP peer group, a string of 1 to 47 characters. 

ip-address: IP address of an IPv4 MBGP peer.  

Use the peer next-hop-local command to specify the router as the next hop for routes sent to a 

peer/peer group.  

Use the undo peer next-hop-local command to remove the configuration. 

By default, routes advertised to an EBGP peer/peer group take the local router as the next hop, while 

routes outgoing to an IBGP peer/peer group do not take the local router as the next hop.  

# In IPv4 MBGP address family view, specify the router as the next hop for routes sent to the peer group 

test.  

<Sysname> system-view 

[Sysname]bgp 100 

[Sysname-bgp]group test internal 

[Sysname-bgp]peer test as-number 200 

[Sysname-bgp]ipv4-family multicast 

[Sysname-bgp-af-mul] peer test enable 

[Sysname-bgp-af-mul] peer test next-hop-local 

peer { group-name | ip-address } preferred-value value  

undo peer { group-name | ip-address } preferred-value 

IPv4 MBGP address family view