3com S7906E Guide De Référence
1-2
Eth2/0/3 Eth2/0/4
Multicast vlan 400
subvlan list:
no subvlan
port list:
no port
Table 1-1 display multicast-vlan command output description
Field
Description
Total 4 multicast-vlan(s)
Total number of multicast VLANs
Multicast vlan
A multicast VLAN
subvlan list
List of sub-VLANs of the multicast VLAN
port list
Port list of the multicast VLAN
multicast-vlan
Syntax
multicast-vlan vlan-id
undo multicast-vlan { all | vlan-id }
View
System view
Default Level
2: System level
Parameters
vlan-id: Specifies a VLAN by its ID, in the range of 1 to 4094.
all: Deletes all multicast VLANs.
Description
Use the multicast-vlan command to configure the specified VLAN as a multicast VLAN and enter
multicast VLAN view.
Use the undo multicast-vlan command to remove the specified VLAN as a multicast VLAN.
The VLAN to be configured is not a multicast VLAN by default.
Note that:
z
The specified VLAN to be configured as a multicast VLAN must exist.
z
The multicast VLAN feature cannot be enabled on a device with IP multicast routing enabled.
z
For a sub-VLAN-based multicast VLAN, you need to enable IGMP Snooping only in the multicast
VLAN; for a port-based multicast VLAN, you need to enable IGMP Snooping in both the multicast
VLAN and all the user VLANs.