Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Guide De Référence

3com S7906E Guide De Référence

Télécharger
Page de 2327
 
1-9 
View 
System view 
Default Level 
2: System level 
Parameters 
limit: Maximum number of entries in the IPv6 multicast forwarding table. The value ranges from 0 to 
512. 
Description 
Use the multicast ipv6 forwarding-table route-limit command to configure the maximum number of 
entries in the IPv6 multicast forwarding table.  
Use the undo multicast ipv6 forwarding-table route-limit command to restore the system default.  
By default, the maximum number of entries in the IPv6 multicast forwarding table is the maximum 
number allowed by the system, namely 512.  
Related commands: display multicast ipv6 forwarding-table. 
Examples 
# Set the maximum number of entries in the IPv6 multicast forwarding table to 200.  
<Sysname> system-view 
[Sysname] multicast ipv6 forwarding-table route-limit 200 
multicast ipv6 load-splitting 
Syntax 
multicast ipv6 load-splitting {source | source-group } 
undo multicast ipv6 load-splitting 
View 
System view 
Default Level 
2: System level 
Parameters 
source: Specifies to implement IPv6 multicast load splitting on a per-source basis. 
source-group: Specifies to implement IPv6 multicast load splitting on a per-source and per-group 
basis. 
Description 
Use the multicast load-splitting command to enable load splitting of IPv6 multicast traffic.  
Use the undo multicast load-splitting command to disable load splitting of IPv6 multicast traffic.  
By default, load splitting of IPv6 multicast traffic is disabled.