3com S7906E Guide De Référence

 

1-27 

By default, the MLD querier robustness variable is 2, so the startup query count is also 2.  

 

Related commands: mld startup-query-count, robust-count.  

# Set the startup query count to 3 globally.  

<Sysname> system-view 

[Sysname] mld 

[Sysname-mld] startup-query-count 3 

startup-query-interval interval 

MLD view 

2: System level 

interval: Startup query interval in seconds, namely, the interval between general queries the MLD 

querier sends on startup, with an effective range of 1 to 18000.  

Use the startup-query-interval command to configure the startup query interval globally.  

Use the undo startup-query-interval command to restore the system default.  

By default, the startup query interval is 1/4 of the “MLD query interval”.  

 

By default, the MLD query interval is 125 seconds, so the startup query interval = 125 / 4 = 31.25 

(seconds).  

 

Related commands: mld startup-query-interval, timer query.  

# Set the startup query interval to 5 seconds globally.