3com S7906E Guide De Référence
1-27
By default, the join/prune timeout time is 210 seconds.
Related commands: holdtime assert, pim ipv6 holdtime assert, pim ipv6 holdtime join-prune.
Examples
# Set the global value of the join/prune timeout time to 280 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] holdtime join-prune 280
jp-pkt-size (IPv6 PIM view)
Syntax
jp-pkt-size packet-size
undo jp-pkt-size
View
IPv6 PIM view
Default Level
2: System level
Parameters
packet-size: Maximum size of join/prune messages in bytes, with an effective range of 100 to 64000.
Description
Use the jp-pkt-size command to configure the maximum size of join/prune messages.
Use the undo jp-pkt-size command to restore the system default.
By default, the maximum size of join/prune messages is 8,100 bytes.
Related commands: jp-queue-size.
Examples
# Set the maximum size of join/prune messages to 1,500 bytes.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] jp-pkt-size 1500
jp-queue-size (IPv6 PIM view)
Syntax
jp-queue-size queue-size
undo jp-queue-size
View
IPv6 PIM view