3com S7906E Guide De Référence
1-31
Use the undo pim ipv6 hello-option dr-priority command to restore the system default.
By default, the router priority for DR election is 1.
Related commands: hello-option dr-priority.
Examples
# Set the router priority for DR election to 3 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim ipv6 hello-option dr-priority 3
pim ipv6 hello-option holdtime
Syntax
pim ipv6 hello-option holdtime interval
undo pim ipv6 hello-option holdtime
View
Interface view
Default Level
2: System level
Parameters
interval: IPv6 PIM neighbor timeout time in seconds, with an effective range of 1 to 65,535. 65,535
means that the PIM neighbor is always reachable.
Description
Use the pim ipv6 hello-option holdtime command to configure the PIM neighbor timeout time on the
current interface.
Use the undo pim ipv6 hello-option holdtime command to restore the system default.
By default, the IPv6 PIM neighbor timeout time is 105 seconds.
Related commands: hello-option holdtime.
Examples
# Set the IPv6 PIM neighbor timeout time to 120 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim ipv6 hello-option holdtime 120
pim ipv6 hello-option lan-delay
Syntax
pim ipv6 hello-option lan-delay interval
undo pim ipv6 hello-option lan-delay