Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Guide De Référence

3com S7906E Guide De Référence

Télécharger
Page de 2327
 
1-1 
1  
IPv6 MBGP Configuration Commands 
IPv6 MBGP Configuration Commands 
balance (IPv6 MBGP address family view) 
Syntax 
balance number 
undo balance 
View 
IPv6 MBGP address family view 
Default Level 
2: System level 
Parameters 
maximum: Number of IPv6 MBGP routes for load balancing, in the range 1 to 4. When it is set to 1, load 
balancing is disabled. 
Description 
Use the balance command to configure the number of IPv6 MBGP routes used for load balancing.  
Use the undo balance command to disable load balancing. 
By default, load balancing is disabled. 
Unlike IGP, IPv6 MBGP has no explicit metric for making load balancing decisions. Instead, it 
implements load balancing by using IPv6 MBGP route selection rules. 
Related commands: display ipv6 multicast routing-table. 
Examples 
# In IPv6 MBGP address family view, set the number of IPv6 MBGP routes for load balancing to 2. 
<Sysname> system-view 
[Sysname]bgp 100 
[Sysname-bgp]ipv6-family multicast 
[Sysname-bgp-af-ipv6-mul] balance 2 
bestroute as-path-neglect (IPv6 MBGP address family view) 
Syntax 
bestroute as-path-neglect 
undo bestroute as-path-neglect