3com S7906E Guide De Référence

 

1-40 

# In BGP-VPNv4 subaddress family view, add peer 1.1.1.1 into peer group test. 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] group test external 

[Sysname-bgp] ipv4-family vpnv4 

[Sysname-bgp-af-vpnv4] peer 1.1.1.1 group test 

# In BGP-L2VPN address family view, add peer 1.1.1.1 into peer group test. 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] group test external 

[Sysname-bgp] l2vpn-family 

[Sysname-bgp-af-l2vpn] peer 1.1.1.1 group test 

peer { group-name | ip-address } ip-prefix prefix-name { export | import } 

undo peer { group-name | ip-address } ip-prefix prefix-name { export | import } 

BGP-VPNv4 subaddress family view 

2: System level 

group-name: Name of the peer group, a case-sensitive string of 1 to 47 characters. 

ip-address: IP address of the peer. 

prefix-name: Name of the IP prefix list, a string of 1 to 19 characters. 

export: Filters the routes to be advertised. 

import: Filters the received routes. 

Use the peer ip-prefix command to apply a route filtering policy based on IP prefix list to a peer or peer 

group. 

Use the undo peer ip-prefix command to remove the configuration. 

By default, no route filtering policy based on IP prefix list is applied to a peer or peer group. 

# In BGP-VPNv4 subaddress family view, specify to filter the received routes of a peer group using IP 

prefix list list1. 

<Sysname> system-view 

[Sysname] bgp 100