3com S7906E Guide De Référence

 

1-47 

[Sysname-bgp-vpn1] quit 

[Sysname-bgp] ipv4-family vpnv4 

[Sysname-bgp-af-vpnv4] peer ebgp vpn-instance vpn1 enable 

peer peer-address vpn-instance vpn-instance-name group group-name 

undo peer peer-address vpn-instance vpn-instance-name group group-name 

BGP-VPNv4 subaddress family view 

2: System level 

peer-address: IP address of the peer. 

vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31 characters. 

group-name:  Name of the peer group, a case-sensitive string of 1 to 47 characters.. 

Use the peer vpn-instance group command to add a peer to a nested VPN peer group. 

Use the undo peer vpn-instance group command to remove a peer from a nested VPN peer group. 

By default, a peer is not in any nested peer group. 

Note that: 

z 

This configuration takes effect only after the nested VPN function is enabled. 

z 

Deleting the VPN instance to which a peer belongs will also delete the configuration of this 

command. 

# Add peer 1.1.1.1 to the nested VPN peer group named ebgp. 

<Sysname> system-view 

[Sysname] bgp 10 

[Sysname-bgp] ipv4-family vpn-instance vpn1 

[Sysname-bgp-vpn1] group ebgp external 

[Sysname-bgp-vpn1] peer 1.1.1.1 as-number 600 

[Sysname-bgp-vpn1] peer 1.1.1.1 group ebgp 

[Sysname-bgp-vpn1] quit 

[Sysname-bgp] ipv4-family vpnv4 

[Sysname-bgp-af-vpnv4] peer ebgp vpn-instance vpn1 enable 

[Sysname-bgp-af-vpnv4] peer 1.1.1.1 vpn-instance vpn1 group ebgp