3com S7906E Guide De Référence

 

2-20 

security-policy-server ip-address 

undo security-policy-server { ip-address | all } 

RADIUS scheme view 

2: System level 

ip-address: IP address of a security policy server. 

all: All IP addresses 

Use the security-policy-server command to specify a security policy server. 

Use the undo security-policy-server command to remove one or all security policy servers. 

By default, no security policy server is specified. 

Note that: 

z 

If more than one interface of the device is configured with user access authentication functions, the 

interfaces may use different security policy servers. You can specify up to eight security policy 

servers for a RADIUS scheme. 

z 

The specified security policy server must be a security policy server or RADIUS server that is 

correctly configured and working normally. Otherwise, the device will regard it as an illegal server.  

Related commands: radius nas-ip. 

# For RADIUS scheme radius1, set the IP address of a security policy server to 10.110.1.2. 

<Sysname> system-view 

[Sysname] radius scheme radius1 

[Sysname-radius-radius1] security-policy-server 10.110.1.2 

server-type { extended | standard } 

undo server-type 

RADIUS scheme view 

2: System level