3com S7906E Guide De Référence

 

3-4 

Any view 

2: System level 

hwtacacs-scheme hwtacacs-scheme-name: Specifies a HWTACACS scheme by its name, a string of 

1 to 32 characters. 

slot slot-number: Specifies the slot where the interface card is inserted. 

Use the display stop-accounting-buffer command to display information about the stop-accounting 

requests buffered in the device. 

Related commands: reset stop-accounting-buffer,  stop-accounting-buffer enable,  retry 

stop-accounting. 

# Display information about the buffered stop-accounting requests for HWTACACS scheme hwt1  on 

the interface board in slot 1. 

<Sysname> display stop-accounting-buffer hwtacacs-scheme hwt1 slot 1 

 Slot 1 

Total 0 record(s) Matched 

hwtacacs nas-ip ip-address 

undo hwtacacs nas-ip 

System view 

2: System level 

ip-address: IP address in dotted decimal notation. It must be an address of the device and cannot be all 

0s address, all 1s address, a class D address, a class E address or a loopback address. 

Use the hwtacacs nas-ip command to set the IP address for the device to use as the source address of 

the HWTACACS packets to be sent to the server.  

Use the undo hwtacacs nas-ip command to remove the configuration. 

By default, the source IP address of a packet sent to the server is the IP address of the outbound port.