3com S7906E Guide De Référence

 

1-8 

# Specify port GigabitEthernet 2/0/7 to use VLAN 3 as its guest VLAN. 

<Sysname> system-view 

[Sysname] interface GigabitEthernet 2/0/7 

[Sysname-GigabitEthernet2/0/7] dot1x guest-vlan 3 

Interface view 

2: System level 

None 

Use the dot1x handshake command to enable the online user handshake function so that the device 

can periodically send handshake messages to the client to check whether a user is online.  

Use the undo dot1x handshake command to disable the function. 

By default, the function is enabled. 

Note that: 

z 

The 802.1X proxy detection function depends on the online user handshake function. Be sure to 

enable handshake before enabling proxy detection and to disable proxy detection before disabling 

handshake. 

z 

To ensure that the online user handshake function can work normally, you are recommended to 

use the iNode client software.  

# Enable online user handshake. 

<Sysname> system-view 

[Sysname] interface GigabitEthernet 2/0/4 

[Sysname-GigabitEthernet2/0/4] dot1x handshake 

dot1x mandatory-domain domain-name 

undo dot1x mandatory-domain 

Interface view