3com S7906E Guide De Référence
1-3
Default Level
1: Monitor level
Parameters
None
Description
Use the display poe device command to display the mapping between ID, module, and slot of all the
power sourcing equipments (PSEs).
Examples
# Display the mapping between ID, module, and slot of each PSE. (The information displayed
depends on the device model.)
<Sysname> display poe device
PSE ID SlotNo SubSNo PortNum MaxPower(W) State Model
19 6 0 48 37 off LSQ1FV48SA
Table 1-1 display poe device command output description
Field
Description
PSE ID
ID of the PSE
SlotNo
Slot number of the PSE
SubSNo
Sub Slot number
PortNum
Number of PoE interfaces on the PSE
MaxPower(W)
Maximum power of the PSE (W)
State
PSE state:
on: The PSE is supplying power.
off: The PSE stops supplying power.
faulty: The PSE fails.
Model PSE
model
display poe interface
Syntax
display poe interface [ interface-type interface-number ]
View
Any view
Default Level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.