3com S7906E Guide De Référence

 

1-31 

nqa server udp-echo ip-address port-number 

undo nqa server udp-echo ip-address port-number 

System view 

2: System level 

ip-address: IP address specified for the UDP listening service on the NQA server. 

port-number: Port number specified for the UDP listening service on the NQA server, in the range 1 to 

50000. 

Use the nqa-server udp-echo command to create a UDP listening service on the NQA server. 

Use the undo nqa-server udp-echo command to remove the UDP listening service created. 

Note that: 

z 

You need to configure the command on the NQA server for UDP-jitter and UDP-echo tests only. 

z 

The IP address and port number must be consistent with those configured on the NQA client and 

must be different from those of an existing listening service. 

z 

The IP address must be that of an interface on the NQA server. Otherwise, the configuration will be 

invalid. 

Related commands: nqa server enable. 

# Create a UDP listening service by using the IP address 169.254.10.2 and port 9000. 

<Sysname> system-view 

[Sysname] nqa server udp-echo 169.254.10.2 9000