3com S7906E Guide De Référence

 

1-28 

using onu { onu-number1 [ to onu-number2 ] } &<1-10> 

undo using onu { onu-number1 [ to onu-number2 ] } &<1-10> 

OLT port view  

2: System level 

onu-number1: ONU port number, in the range 1 to 64. 

to onu-number2: Specifies an ONU port range. onu-number2 is an ONU port number, in the range 1 to 

64. 

&<1-10>: Indicates that you can specify up to 10 ONU port numbers/port ranges.  

Use the using onu command to create virtual ONU port(s) for the current OLT port.  

Use the undo using onu command to remove the specified ONU port(s) under the current OLT port.  

By default, no ONU port is created for any OLT port when the EPON card is started up. 

To use the interface command to enter ONU port view, use the using onu command to create the 

corresponding ONU port first.  

# Create ONU 3/0/1:5 whose sub-channel number is 5 for OLT 3/0/1. 

<Sysname> system-view 

[Sysname] interface olt 3/0/1 

[Sysname-Olt3/0/1] using onu 5 

Please wait…Done. 

# Create ONU ports whose sub-channel numbers are 1 to 5 for OLT 3/0/1. 

<Sysname> system-view 

[Sysname] interface olt 3/0/1 

[Sysname-Olt3/0/1] using onu 1 to 5 

Please wait….Done. 

[Sysname-Olt3/0/1] display brief interface onu 

The brief information of interface(s) under bridge mode: 

Interface            Link      Speed        Duplex   Link-type  PVID 

Onu3/0/1:1           DOWN      --           --       access     1 

Onu3/0/1:2           DOWN      --           --       access     1 

Onu3/0/1:3           DOWN      --           --       access     1 

Onu3/0/1:4           DOWN      --           --       access     1 

Onu3/0/1:5           DOWN      --           --       access     1