3com S7906E Guide De Référence
2-7
If no parameter is specified, the information about all the protocols that the ONU supports is displayed.
This command takes effect on H3C ONUs only.
STP runs normally only when all attached ONUs are H3C ONUs.
Examples
# Display the information about IGMP snooping supported by the ONU.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] display onu-protocol igmp-snooping
Protocol name: IGMP snooping
Protocol status: enabled
Multicast Address UNI Port VLAN
1 01:00:5e:01:01:01 2 10
2 01:00:5e:01:01:02 3 20
Table 2-3 display onu-protocol igmp-snooping command output description
Field
Description
Protocol name: IGMP snooping
Protocol name
Protocol status: enabled
Protocol status: enabled or disabled
Multicast Address
Multicast MAC address
UNI Port
UNI port number
VLAN
Multicast VLAN number
display vendor-specific information
Syntax
display vendor-specific information
View
ONU port view
Default Level
1: Monitor level
Parameters
None