3com S7906E Guide De Référence
2-28
Examples
# Enable auto-negotiation on UNI port 1.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] uni 1 auto-negotiation
uni description
Syntax
uni uni-number description text
undo uni uni-number description
View
ONU port view
Default Level
2: System level
Parameters
uni-number: UNI number of an ONU, in the range 1 to the number of UNI ports of the current ONU. The
number of UNIs can be up to 80.
text: String of 1 to 40 characters describing the UNI.
Description
Use the uni description command to configure a description for a UNI.
Use the undo uni uni-number description command to restore the default.
By default, no description is configured for a UNI.
Examples
# Configure the description of UNI 1 as Test.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] uni 1 description Test
uni duplex
Syntax
uni uni-number duplex { full | half | auto }
undo uni uni-number duplex
View
ONU port view